|
Post by RD on Jan 10, 2009 11:19:33 GMT -5
Good mulch ideas. Any other requests? After seeing the tee pads at Liberty, I have a slightly different idea about 7r, 5w, 13a r. Instead of cutting into the hillside and lining the high side with timbers, how about this? At the back and the deepest part of the sides, lay a block foundation and wall. Sink rebar in the bottom row into the ground, fill block with concrete. Build the block up to the right level, then fill in with dirt. _____ Fill dirt to top ___________________ xxx-------------------------------------------- / xxxx-----------------------------------/ xxxxx--------------------------/ xxxxx------------------/ Existing Incline xxxxxxx------/ ------/ / I like this for 7r and 13a r. For runups, the other method will work better for 5w. Watcha' think? Ron yes, thats what i had in mind, no digging, just building up to level, and filling in with dirt. where can we get some dirt? When the time comes we could certainly use that cordless saw jdaviau. thanks with the weather and all that is going on (ice bowls) I think we could start these bigger projects after our ice bowl. lets get these flat pads done first. Ron, I am off the 16th. Free all day. Can they get us those piles of mulch before then?
|
|
|
Post by Ron Pittman on Jan 10, 2009 17:34:06 GMT -5
Awright. They are still mulching the trees. We already have a pile by 6 tees.
I will get dumps made this week near 5 tees near 15 target 17 target past 2 target
The park staff has a backup pile behind the center near the pickanick tables. We can always rob from there.
More?
Ron
|
|
|
Post by RD on Jan 12, 2009 16:17:59 GMT -5
I think that will work. I'll try to get some done friday.........can anyone else make it out? i'll probably be there around 10.....work till 1 or 2.....throw a round and get ready for the m'boro and smyrna ice bowls......(i decided to skip nicholasville, why drive up there when its plenty cold here)
|
|
Jeff
Newbie
Posts: 24
|
Post by Jeff on Jan 12, 2009 22:02:27 GMT -5
How do you guys get time off during the week?
|
|
|
Post by RD on Jan 13, 2009 11:59:27 GMT -5
Well im fortunate enough that when i have to work a saturday, i get the following friday off.
|
|
|
Post by Ron Pittman on Jan 13, 2009 12:57:48 GMT -5
How do you guys get time off during the week? Most days my boss is a real goober. Sometimes he is a pushover. I just have to know when to ask. RD, I can match your Friday schedule. Still working on the mulch. It has first been wet, and now cold. The maintenence men might be munching on how much mulch to mulch. I plan to nail down our workday schedule for 17,18, 24,25 later this evening. I am hoping several folks can make the one of most convenience. Ron
|
|
|
Post by RD on Jan 13, 2009 16:39:48 GMT -5
Ron, sounds good. think we'll get some more carpet by then? With a couple of us we may get a bit done on the pads too. I'll be there around 10am
|
|
|
Post by Ron Pittman on Jan 14, 2009 14:45:24 GMT -5
RD, Have you given any thought to Friday's temp and its impact on our lives?
I can get talked into not working this Friday at Crockett. Start talking.
Ron
PS I am saving some energy for Mboro.
|
|
|
Post by bullington on Jan 14, 2009 17:33:52 GMT -5
Most days my boss is a real goober. Sometimes he is a pushover. I just have to know when to ask. Your boss sounds alot like mine, he hardly ever has any problems with me getting off for disc golf related events.
|
|
|
Post by RD on Jan 14, 2009 18:24:26 GMT -5
Ron I certainly have, 5 degree mulch might be hard to shovel.
See ya Sat. in M'boro. (they'll have some HOT chili there)
RD.
|
|